Safety gratings have a wide range of uses and are suitable for various fields, but due to the difference in the beam distance, the installation position is also different. It should be noted here that the greater the beam distance, the longer the selected cable should be. Why is this? Safety light barriers are used around machinery and equipment. It is installed to protect the personal safety of operators. Therefore, the signal of the safety light barrier must be connected to the control point of the equipment. If the light barrier is far away from the control point of the equipment, Then the output cable of the grating has to be lengthened.

If the beam distance of the safety grating is within 3m, you can choose a conventional 3m cable, but if the beam distance is 12m, the cable cannot be 3m long. In this case, you can choose a custom line The length of the cable. The length of the matching cables of the photoelectric safety grating is generally two 3m. If you have customized cables, you can contact the sales staff. It should be noted here that if the cable length exceeds 100m, the response is likely to become slow, so the safety factor is not high. So when you choose the cable of the safety grating, you must communicate with the manufacturer about the on-site usage, otherwise it will not be used if you buy it back, which will cause a lot of trouble.
​